Great Dane - GPE Model:
Great Dane extendable flats offer the versatility and durability found only in premioum equipment. Extendable in five foot increments to a length of 90 feet to carry self-supporting loads. They may be used as conventional trailers when closed.
Standard Specifications:
Axles: Great Dane spec 22,500 lb. Rating.
Brakes: 16 ½ “x 7” Air. ABS 2S/1M. Parking brakes.
Bumper: Rear impact guard meets DOT specs.
Main Beams (Front): Fabricated I-beam 16 ¼” deep with ½”
hi-tensile steel flanges.
Main Beams (Rear): Fabricated I-beam boxed section, 17 ½” deep
with ½” x 6” flanges.
Crossmembers: 4” I-beams
King Pin: 30” location, AAR approved.
Lights: DOT 12 volt, Great Dane Ultra Seal wiring harness with metal 7-way
receptacle.
Locks: Beam lock mechanism is air controlled, spring-loaded and adjusted
in 5’ increments.
Mud Flaps: Great Dane low spray.
Oil Seals: Stemco.
Paint: Finest industrial quality.
Rollers: Front and rear sections equipped with 6” diameter solid steel
rollers for ease of adjustment.
Rub Rail: ¼” x2“outside rub rail with single pipe spool
spacers.
Side Rail: 6.5 lb./ft. structural channel 6” deep with 1 7/8 ‘
flanges.
Springs; 3-leaf, 44,000 lb. Capacity.
Stake Pockets: Outside type 3/16” material; 1 7/8” x 3 3/8”
I.D. spaced 24” on center. Four across front and 5 on the rear.
Support Gear: GD 70 (19” travel). Two speed, narrow mount with replaceable,
cushion foot sand shoes. Roadside crank.
Suspension: Hutch 9700, fixed location.
* Due to the constant improvements in our products, the designs, materials and specifications are subject to change without notice.
