Morgan - Dry Freight Van Bodies:
- Quality Construction with Unlimited Versatility
- Variety of Dry Freight Van Body Lengths and Heights
- Aerodynamic Poly-Tuff Corner Caps with Built-In Light Socket and Protection
- Highly Durable Aluminum or FRP Wall Construction
- One-Piece Aluminum Crowned Roof Installed Over Low Profile Anti-Snag Galvanized Roof Bows
- Rear Frame Header Offers Better Clearance Light Protection
- Sealed Wire Harness
- ISO 9001 Registered
Making the best product takes a total commitment to craftsmanship and creativity, and it shows in every corner of a Morgan-made dry freight truck body. Whether you need an aluminum, FRP or insulated body, Morgan can build one or an entire fleet to your exacting specifications. All backed with a five year limited warranty.
From subframe to roof top, Morgan's superior design, custom features and trouble-free durability are everywhere.
With a Morgan-made dry freight body, you're guaranteed industry-leading engineering, and exceptional dependability. No matter what size dry freight body you specify, Morgan will build it better with a vast array of options and fast delivery.
Solid, Safe and Secure Interiors
Insides every Morgan-made body is high quality craftsmanship at work with the finest materials. From roof to rear finish, each Morgan dry freight van body is designed for superior performance and long-term durability.
Van bodies come in 12 feet to 30 feet lengths with a variety of interior options and several rear and side door configurations. Here's a brief look at interior options that work to help you safely and efficiently move practically anything, anywhere.
Customize Your Dry Freight Van Body with a Variety of Options
Morgan dry freight bodies can be equipped with a variety of durable options to meet your exacting specifications. This customized attention to detail is what seperates us from others and what helps Morgan construct the best dry freight truck body in the industry.
Whatever size truck body works best for you, we will design and build it to give you maximum payload protection, superior safety and convenience.
| Interior Options
|
Exterior Options
|
Morgan - Insulated Dry Freight Van Bodies:
Standard Features
| Body Lengths: 14' - 24' Body Heights: 85", 91", 97" Body Width: 96" Subframe: 4" I-beam long rails, 3" I-beam cross-members on 12" centers, galvannealed steel front end plate. Floor Type: 1-1/8" laminated hardwood, with galvanized steel threshold, rear drain trough, drain holes and seals. 2-9/16" polystrene bock foam (R-value - 4.0/in) between crossmembers with glassboard liner beneath. (If specifying a refrigeration unit, an aluminum or varnished wood floor and liner are recommended due to potential for moisture damage.) Side Walls: Sheet & Post - .040" aluminum sheet fastened to 1-3/8" steel Z posts on 16" centers, uniform quality rivet installation. 1-5/16" polystyrene block foam inside walls, protected by 5.2 mm lauan plywood liner. |
Front-end Assembly: Sheet & Post - .040" aluminum wall with 1-5/16" block foam insulation protected by lauan plywood liner. Fiberglass insulation in top radii and rear frame. Rear Frame: Header design with rain channel/drip rail permits 1" narrower header and better protection for clearance lights. Extended truck chassis L-channel and Morgan steel-channel U-bolt attachment plates for improved body support. High, wide door opening, with curb-side grab handle. Roof Assembly: Aluminum sheet with Morgan's anti-snag bows for improved adhesive seal at all contact points. 1-5/16" polystyrene block foam in ceiling protected by lauan plywood liner. One dome light recessed into ceiling with switch cab.
|
* Due to the constant improvements in our products, the designs, materials and specifications are subject to change without notice.
