6364 NE 63rd Ave • Portland, OR 97218  503-282-7207 • Fax 503-288-4057 • 1-800-777-0743
Mount Trailer Company Products

Trail-Eze - TE 70SA Sliding Axle Trailers:

General Specifications:
Distributed Capacity: 70,000 lbs.
Concentrated Capacity: 40,000 lbs. (in 10')

Dimensions:
Overall Length: 42' to 53'
Main Deck Length: 31' to 42'
Upper Deck Length: 115"
Deck Width: 8'-6"
Approach Ramp: 26" Fold Under
Deck Height: 37"
Swing Clearance: 80"
King Pin Setting: 18"

Load Angle: 8 to 6-3/4" Degrees.

Frame: All hi-tensile steel I-beams. Center frame dominant design with "C" channel type side rails.

Platform: 1-3/8" oak flooring attached to every crossmember with torx head screws. 3/16" steel tread plate over wheel areas. Crossmembers on 12".

Operation: The main bed is tilted hydraulically and the hinged slope forms a straight ramp to upper deck which remains flat on the fifth wheel at all times.

Axles: (2) 22,500 lb.

Brakes: S-cam air-activated, 12-1/4" x 7-1/2". Complete ABS with auto slack adjusters and spring (maxi) brakes on all axles.

Wheels: (8) 6.75 x 17.5 10 hole steel disc.

Tires: (8) 215/75R x 17.5 ply radials.

Park Stands: Two-speed landing gear.

Suspension: Air-Ride

Tiedowns: Stakepockets on 2' centers with rub-rail..

Electrical: ICC DOT standard sealed light system with midship turn signal.

Winch: 12,000 lb. hydraulic with remote control.

Paint: Trailer is sandblasted, primed and painted one coat "Dakota Red" enamel..

Warranty: Limited 5 Year Prorated Major Structural Warranty.

Options:

  • Width to 10'
  • Spread Axle
  • Undercoating
  • 20,000 lb. Winch
  • Dock Levelers
  • Air-Ride Dump Valve
  • Self-Contained Hydraulic Package
  • Additional Axle
  • Variety of Tiedowns
  • Hydraulic Landing Gear
  • 4-Beam Design

Track Package includes the following:

  • 1/4" floor plate on the approach plate
  • 1/4" floor plate on the rear of main bed
  • 1/4" floor plate over the wheels
  • Choice of Paint
  • Increased Length and Width

* Due to the constant improvements in our products, the designs, materials and specifications are subject to change without notice.

Back